AniseLib.dll缺少的用戶，到騰牛網下載該資源，然后將AniseLib.dll文件按照下面的方法步驟放到正確的位置內，就能解決因缺失AniseLib.dll引發的問題啦。

安裝方法：

1、解壓下載的文件。

2、復制文件“*”到系統目錄下。

3、系統目錄一般為：C:\Windows\System32 64位系統為C:\Windows\SysWOW64

4、最后點擊開始菜單-->運行-->輸入regsvr32 keyhookdll.dll后，回車即可解決錯誤提示。

詳細說明：

如果您下載的是DLL文件（如果是其他軟件請無視下面的信息）：

1、下載后根據您系統的情況選擇X86/X64，X86為32位電腦，X64為64位電腦。 如果您不知道是X86還是X64，可以住個嘗試。

2、把dll文件拷貝到對應目錄

C:\Windows\System (Windows 95/98/Me)

C:\WINNT\System32 (Windows NT/2000)

C:\Windows\System32 (Windows XP,Vista,7,8,10)

如果是64位文件C:\Windows\SysWOW64

至此如果問題依舊，您可能需要使用regsvr32注冊文件

方法如下： 單擊開始，選擇運行 ，輸入 regsvr32 MixedRealityCapture.Pipeline.dll 并按下確認 之后會彈出注冊成功信息即可。

If you download a DLL file, this is the installation instructions.

Step 1

Open the MixedRealityCapture.Pipeline.dll file you downloaded from zhaodll.com.

After extracting your zip or rar, place the extracted DLL in the directory of the program that is requesting the file. Make sure to use a 32bit DLL for a 32bit program, and a 64bit DLL for a 64bit program. Failure to do so will likely result in a 0xc000007b error.

Step 2

If that does not help your problem, place the file to your system directory.

By default, this is

C:\Windows\System (Windows 95/98/Me),

C:\WINNT\System32 (Windows NT/2000), or

C:\Windows\System32 (Windows XP, Vista, 7, 8, 8.1, 10).

On a 64bit version of Windows, the default folder for 32bit DLL is C:\Windows\System32\ , and for 64bit dll C:\Windows\SysWOW64\ .

Make sure to overwrite any existing files (but make a backup copy of the original file).

Reboot your computer.

Step 3

If the problem still occurs, try the following to register the DLL:

For 32bit DLL on a 32bit Windows, and for 64bit DLL on a 64bit Windows:

Open an elevated command prompt.

To do this, click Start, click All Programs, click Accessories, right-click "Command Prompt", and then click Run as administrator.

In Windows 8/10, go to the Start screen. Start typing cmd and Windows will find "Command Prompt". Right click "Command Prompt" and choose "Run as administrator".

If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.

Type regsvr32 MixedRealityCapture.Pipeline.dll and press Enter.

Registering 32bit DLL on a 64bit Windows:

Open an elevated command prompt, as instructed above.

In the command prompt, start by typing following and press enter:

cd c:\windows\syswow64\

then type the following and press enter:

regsvr32 c:\windows\syswow64\MixedRealityCapture.Pipeline.dll

Finally, reboot your PC one last time to refresh the memory. That should do it!